What is it about?
A map shows reality reduced. The scale tells you by how much. A hiking map says, for example, 1 : 25,000 (read “one to twenty-five thousand”). This means:
The number after the colon is the scale number. You can calculate in both directions:
- Map → reality: map length times the scale number. Example: .
- Reality → map: convert the real length to cm, then divide by the scale number. Example: and .
- Finding the scale: put both lengths in the same unit and divide. Example: on the map are ; , so .
A map with a small scale number (e.g. ) shows a small area with many details – you can see every house. A map with a large scale number (e.g. ) shows a large area with few details. The scale bar at the bottom left of the map is divided into pieces of each and shows directly how far one centimetre is in reality.
Very small things are enlarged. Then the larger number comes first: 10 : 1 means in the picture are in reality. A ladybird is long in the picture; back to reality: .
Note: The centimetres in the simulation are the centimetres of the drawn ruler – on screen they may be a little larger or smaller than real centimetres, depending on the device. Lengths are always measured to , just like with a school ruler.
Try it
- The line from the church to the station is long on the map. How far is that in reality? Compare with the scale bar. Load example
- Switch between the scales. What happens to the length on the map, and what to the real distance? Which details disappear at ?
- Tap two places on the map one after the other (e.g. church and lookout tower). How long is the straight line at ? Load example
- Measure the way from the church to the bathing spot once as a straight line and once along the road. Why is the route longer? Route
- Drag both handles exactly on top of each other. What does the calculation show now?
- Under Enlarge, look at a grain of sand at the scale . How big is it in the picture, how big in reality? Grain of sand
Tasks
Task 1: From the map to reality
On a map at the scale , two places are apart. How far apart are they in reality? Load task
Show solution
Task 2: Town plan
On the town plan (), measure the straight line from the school to the town hall and convert it. Load task
Show solution
The line is long on the map: . Show in the simulation
Task 3: From reality to the map
The bathing spot is from the church as the crow flies. How long is this line on a map at the scale ? Load task
Show solution
Task 4: Finding the scale
On a map, two places are apart; in reality they are apart. What is the scale of the map? Load task
Show solution
; . The map has the scale . On the map: church to lookout tower. Show in the simulation
Task 5: Enlargement
An ant is long. How long is it in a picture at the scale ? And a grain of sand with a diameter of at the scale ? Work it out yourself first – the Enlarge view shows the result straight away.
Show solution
Ant: . Grain of sand: . Show the ant · Show the grain of sand
Task 6: Straight line or route?
From the church to the bathing spot, the straight line on the map () is . Measured piece by piece along the road, the route is in total. How long are both in reality, and how much longer is the route? Load task
Show solution
Straight line: . Route: . The route is longer than the straight line. Show in the simulation
Ideas for the classroom
- Use: Grade 5, measures (length, scale). Use the map as a shared introduction on the projector and the “New measuring task” with the result hidden for practice in pairs.
- Link to a real map: Afterwards, have the children measure their way to school on a hiking map of the area and convert it.
- Model: The landscape is invented. As on real maps, houses and map symbols are drawn somewhat larger than they would be to scale. The map length is measured to the nearest ; the calculation uses this measured value.
- Common stumbling blocks:
- The unit is forgotten: are centimetres, not metres.
- The number of zeros is mixed up when converting cm to km – correct is .
- “Large scale” is confused with “large scale number”: is the larger scale; it shows more details.
- When finding the scale, lengths in different units are divided ().
- With enlargements, students multiply instead of dividing ( is correct, not ).